Folding gift box
A one-piece tuck-end box net for paper or cardstock, with fold lines, a glue flap and an optional shaped window.
No account needed. The editor opens a guest design you can keep by signing in later.
Default configuration, rendered by the engine (sheet 1).
What it does
- Width, depth and height from 20 to 300 mm
- Cut outline and fold lines on separate layers (score on cutters, blue lines when printed)
- Top and bottom tuck flaps with dust flaps, one glued side seam
- Optional star, circle, heart or rectangle window in the front panel
- Printable 1:1 and tiled PDFs, or Cricut / Silhouette SVG
What it does not do (yet)
- Paper and cardstock only (folds need a flexible sheet)
- Window covers are not included
- One box style (reverse tuck end)
Supported parameters
Read directly from the generator's field definitions — these are the ranges the editor enforces.
| Parameter | Supported | This template |
|---|---|---|
| Width (front) | 30 – 300 mm | 80 mm |
| Depth (side) | 20 – 200 mm | 60 mm |
| Height | 20 – 300 mm | 80 mm |
| Window in the front | No window, Star, Circle, Heart, Rounded rectangle | No window |
| Window size (%) Size of the window relative to the smaller side of the front panel. | 15 – 75 | 45 |
| Glue flap width | 8 – 25 mm | 12 mm |
Materials
Plywood 3 mm
Thickness options: 3, 4, 5, 6 mm · min feature 1.5 mm
Real plywood varies ±0.3 mm; measure your sheet with calipers for tight joints.
MDF 3 mm
Thickness options: 3, 4, 6 mm · min feature 1.5 mm
MDF chars at edges; kerf is often slightly wider than plywood.
Acrylic 3 mm
Thickness options: 2, 3, 4, 5 mm · min feature 1 mm
Cast acrylic engraves frosty white; extruded acrylic does not. Finger joints in acrylic are brittle: use glue.
Paper (120 gsm, ~0.15 mm)
Thickness options: 0.1, 0.15, 0.2 mm · min feature 1 mm
Printable templates: print at 100 % and check the ruler before cutting.
Adhesive vinyl (~0.1 mm)
Thickness options: 0.08, 0.1, 0.15 mm · min feature 1.5 mm
Never laser cut vinyl (PVC): it releases chlorine gas.
Fine details under 1.5 mm are hard to weed.
Heat-transfer vinyl (~0.15 mm)
Thickness options: 0.1, 0.15, 0.2 mm · min feature 1.5 mm
Cut mirrored (turn on Mirror output).
Never laser cut vinyl (PVC).
Veg-tan leather 2 mm
Thickness options: 1.5, 2, 3 mm · min feature 2 mm
Only vegetable-tanned leather is laser-safe; chrome-tanned leather releases toxic fumes.
General starting points; your measured thickness and kerf always override presets. We do not assert compatibility with specific machine brands.
Templates in this family
No published templates yet — open the editor with defaults above.
Questions
Try it with your own measurements
No account needed. Open a real parametric design, change the dimensions and watch every joint follow — then pay only if you want the files.