Templates: starting points for your own design
Every template is a live parametric component. Open it in the studio as a guest, change sizes, thickness and text, then add your own shapes, holes and lettering around it. The preview on each card is the real engine output for the template's defaults.
9 templates
Gift box 200 × 150 × 100 mm
Open-top finger-joint box in 3 mm plywood with an engraved name on the front.
Default 200 × 150 × 100 mm · plywood 3 mm
Keepsake box with removable lid
160 × 120 × 70 mm box with a removable cap lid that registers inside the walls.
Default 160 × 120 × 70 mm · plywood 3 mm
Desk organizer, 4 compartments
250 × 120 × 60 mm open organizer with three drop-in dividers.
Default 250 × 120 × 60 mm · plywood 3 mm
Drawer organizer, 6 compartments
360 × 150 × 50 mm low organizer for drawers with five dividers.
Default 360 × 150 × 50 mm · plywood 3 mm
Two-layer name sign (script)
220 × 120 mm rounded plaque with raised script lettering and two hanging holes.
Default 220 × 120 mm · plywood 3 mm
Engraved welcome plaque
300 × 150 mm single-layer plaque with engraved serif text and scalloped corners.
Default 300 × 150 mm · plywood 3 mm
Cardstock layered name tag (cutting plotter)
160 × 80 mm two-layer cardstock tag with raised letters for Cricut/Silhouette-style plotters.
Default 160 × 80 mm · cardstock 0.35 mm
Round coaster set of 4
Four 95 mm round coasters in 3 mm plywood with an engraved border ring and a centred monogram.
Default 95 mm · plywood 3 mm
Hexagon coasters with holder rack
Six 100 mm hexagonal coasters plus a finger-jointed rack with a finger-grip notch.
Default 100 mm · plywood 3 mm
Or start from a product family
Each family is a tested generator with explicit ranges. Open one with default sizes and customize from there.
Finger-joint box
AvailableA sturdy rectangular box with finger-jointed corners, optional removable cap lid and engraved text.
Not yet: Sliding and hinged lids are not available yet
Compartment organizer
AvailableAn open-top desk or drawer organizer with evenly spaced slot-in dividers and finger-jointed corners.
Not yet: Dividers run in one direction (across the width)
Layered name sign
AvailableA one- or two-layer plaque with your name as raised, engraved or stencil-cut letters and optional hanging holes.
Not yet: Stencil mode refuses letters with enclosed counters instead of producing loose islands
Coaster set
AvailableA set of identical coasters — round, rounded-square or hexagonal — with optional engraved text or border, and an optional holder rack.
Not yet: The holder needs a rigid material (plywood, MDF, acrylic) and laser cutting
Try it with your own measurements
No account needed. Open a real parametric design, change the dimensions and watch every joint follow — then pay only if you want the files.