Coaster set
A set of identical coasters — round, rounded-square or hexagonal — with optional engraved text or border, and an optional holder rack.
No account needed. The editor opens a guest design you can keep by signing in later.
Default configuration, rendered by the engine (sheet 1).
What it does
- 1 to 12 identical coasters from 60 to 150 mm
- Circle, rounded square or hexagon outlines
- Centred engraved text (three licensed fonts) and/or an engraved border ring
- Optional finger-jointed holder rack with a finger-grip notch, sized from your measured thickness
- Cardstock version for cutting plotters (without the holder)
What it does not do (yet)
- The holder needs a rigid material (plywood, MDF, acrylic) and laser cutting
- No cork backing, no inlays, no raster image engraving
- Hexagons are regular (width across corners = size)
Supported parameters
Read directly from the generator's field definitions — these are the ranges the editor enforces.
| Parameter | Supported | This template |
|---|---|---|
| Coaster size (across) Diameter, square side or hexagon width across corners. | 60 – 150 mm | 95 mm |
| Shape | Circle, Rounded square, Hexagon | Circle |
| Number of coasters | 1 – 12 | 4 |
| Corner radius (square) | 0 – 30 mm | 8 mm |
| Engraved border inset 0 = no border ring. Otherwise an engraved outline is inset by this distance. | 0 – 10 mm | 0 mm |
| Add holder rack A finger-jointed open tray the coasters stand in on edge. Rigid materials and laser cutting only. | on / off | false |
| Holder finger width | 3 – 30 mm | 8 mm |
| Font | Inter Bold, Lora Bold, Pacifico (all OFL-licensed) | inter_bold |
| Text cap height | 3 – 80 mm | auto |
Materials
Plywood 3 mm
Thickness options: 3, 4, 5, 6 mm · min feature 1.5 mm
Real plywood varies ±0.3 mm; measure your sheet with calipers for tight joints.
MDF 3 mm
Thickness options: 3, 4, 6 mm · min feature 1.5 mm
MDF chars at edges; kerf is often slightly wider than plywood.
Acrylic 3 mm
Thickness options: 2, 3, 4, 5 mm · min feature 1 mm
Cast acrylic engraves frosty white; extruded acrylic does not. Finger joints in acrylic are brittle: use glue.
Paper (120 gsm, ~0.15 mm)
Thickness options: 0.1, 0.15, 0.2 mm · min feature 1 mm
Printable templates: print at 100 % and check the ruler before cutting.
Adhesive vinyl (~0.1 mm)
Thickness options: 0.08, 0.1, 0.15 mm · min feature 1.5 mm
Never laser cut vinyl (PVC): it releases chlorine gas.
Fine details under 1.5 mm are hard to weed.
Heat-transfer vinyl (~0.15 mm)
Thickness options: 0.1, 0.15, 0.2 mm · min feature 1.5 mm
Cut mirrored (turn on Mirror output).
Never laser cut vinyl (PVC).
Veg-tan leather 2 mm
Thickness options: 1.5, 2, 3 mm · min feature 2 mm
Only vegetable-tanned leather is laser-safe; chrome-tanned leather releases toxic fumes.
General starting points; your measured thickness and kerf always override presets. We do not assert compatibility with specific machine brands.
Templates in this family
Round coaster set of 4
Four 95 mm round coasters in 3 mm plywood with an engraved border ring and a centred monogram.
Default 95 mm · plywood 3 mm
Hexagon coasters with holder rack
Six 100 mm hexagonal coasters plus a finger-jointed rack with a finger-grip notch.
Default 100 mm · plywood 3 mm
Questions
Try it with your own measurements
No account needed. Open a real parametric design, change the dimensions and watch every joint follow — then pay only if you want the files.