Drawer organizer, 6 compartments
360 × 150 × 50 mm low organizer for drawers with five dividers.
- Default size
- width 360 mm · depth 150 mm · height 50 mm
- Material
- plywood 3 mm
- Outputs
- SVG · DXF · 1:1 PDF
Free to customize and preview as a guest; pay only to download the production package.
Cutting layout for the default configuration, generated by the engine — not an illustration.
About this template
A wide, low tray. The engine enforces a minimum compartment width of 20 mm and tells you the maximum count for your width.
Included features
- 1 to 12 compartments recomputed as you change the width
- Dividers drop into slots from the top; no extra hardware
- Compartment sizes, divider positions and slot widths derived from measured thickness
- Optional engraved label on the front
Limitations
- Dividers run in one direction (across the width)
- Minimum compartment width 20 mm
- Laser cutting only in this release
Sizes, materials and options you can change
| Parameter | Supported | This template |
|---|---|---|
| Width (outside) | 60 – 600 mm | 360 mm |
| Depth (outside) | 40 – 600 mm | 150 mm |
| Height (outside) | 20 – 300 mm | 50 mm |
| Compartments Dividers are spaced evenly across the width and drop into slots from the top. | 1 – 12 | 6 |
| Finger width | 3 – 60 mm | 10 mm |
| Joint fit clearance | 0 – 1 mm | 0 mm |
| Divider slot clearance Added to the divider slot width so dividers slide in without forcing. | 0 – 1 mm | 0.2 mm |
| Font | Inter Bold, Lora Bold, Pacifico (all OFL-licensed) | inter_bold |
| Text cap height | 3 – 120 mm | auto |
Inputs this template accepts
- Parameters typed in the editor (mm or inches)
- Natural-language edits, proposed as reviewable changes
- Text for engraving or lettering, converted to outlines
- Photos or sketches cannot resize this template's joinery
License
Purchased files come with the DIYCUTLAB-STD license: personal use and commercial production of physical items are allowed; reselling the digital files is not. Fonts are SIL OFL licensed and shipped with their license texts.
Questions about this design
How do the dividers attach?
Dividers drop into slots cut from the top edge of the front and back walls. The slot width is your material thickness plus a small clearance; the lower part of each divider rests on the base and against the walls.
How many compartments can I have?
1 to 12 across the width, as long as each compartment stays at least 20 mm wide. The editor tells you the maximum for your width and thickness.
Can dividers run both ways?
Not in this release: dividers run in one direction, across the width.
Related templates
Desk organizer, 4 compartments
250 × 120 × 60 mm open organizer with three drop-in dividers.
Default 250 × 120 × 60 mm · plywood 3 mm
Try it with your own measurements
No account needed. Open a real parametric design, change the dimensions and watch every joint follow — then pay only if you want the files.