Keepsake box with removable lid
160 × 120 × 70 mm box with a removable cap lid that registers inside the walls.
- Default size
- width 160 mm · depth 120 mm · height 70 mm
- Material
- plywood 3 mm
- Outputs
- SVG · DXF · 1:1 PDF
Free to customize and preview as a guest; pay only to download the production package.
Cutting layout for the default configuration, generated by the engine — not an illustration.
About this template
Seven parts: five finger-jointed panels plus a two-piece cap lid. The lid lip is sized from the inside dimensions with a small clearance you control.
Included features
- Outside dimensions from 40 × 40 × 20 mm to 600 × 600 × 400 mm
- Finger joints recomputed from your measured sheet thickness
- Optional removable cap lid with an inner registration lip
- Engraved text on the front panel, converted to real outlines
- Open-top or capped; every part named and counted
Limitations
- Sliding and hinged lids are not available yet
- Laser cutting only; CNC dog-bone relief is not generated
- Fit depends on your measured thickness and kerf — always test-cut one corner
Sizes, materials and options you can change
| Parameter | Supported | This template |
|---|---|---|
| Width (outside) | 40 – 600 mm | 160 mm |
| Depth (outside) | 40 – 600 mm | 120 mm |
| Height (outside) | 20 – 400 mm | 70 mm |
| Lid Sliding and hinged lids are not offered yet: we only list lid styles whose geometry is generated and tested. | Open top, Removable cap lid | Removable cap lid |
| Finger width Target width of each joint finger. The engine picks an odd finger count closest to this. | 3 – 60 mm | 10 mm |
| Joint fit clearance Widens every notch by this amount. Leave 0 for a press fit when you have a measured kerf. | 0 – 1 mm | 0 mm |
| Font | Inter Bold, Lora Bold, Pacifico (all OFL-licensed) | inter_bold |
| Text cap height | 3 – 120 mm | auto |
Inputs this template accepts
- Parameters typed in the editor (mm or inches)
- Natural-language edits, proposed as reviewable changes
- Text for engraving or lettering, converted to outlines
- Photos or sketches cannot resize this template's joinery
License
Purchased files come with the DIYCUTLAB-STD license: personal use and commercial production of physical items are allowed; reselling the digital files is not. Fonts are SIL OFL licensed and shipped with their license texts.
Questions about this design
Are the dimensions inside or outside?
Width, depth and height are outside dimensions. The inside dimensions are shown in the editor's assumptions and in the assembly sheet (outside minus two wall thicknesses; height minus the base thickness).
How are the fingers calculated?
Each jointed edge is divided into an odd number of equal segments closest to your target finger width. Mating panels use complementary parities and notches are exactly as deep as your measured material thickness, so the pattern regenerates whenever you change size or thickness.
Which lid styles exist?
Open top or a removable cap lid: a flat top with a glued inner lip that registers inside the walls. Sliding and hinged lids are not offered until their geometry is generated and tested.
Can I engrave a name?
Yes, on the front panel. Text is converted to real outlines using licensed fonts and placed in the safe area away from the joints; if it does not fit it is scaled down and you are told.
Related templates
Gift box 200 × 150 × 100 mm
Open-top finger-joint box in 3 mm plywood with an engraved name on the front.
Default 200 × 150 × 100 mm · plywood 3 mm
Try it with your own measurements
No account needed. Open a real parametric design, change the dimensions and watch every joint follow — then pay only if you want the files.