Templates: starting points for your own design
Every template is a live parametric component. Open it in the studio as a guest, change sizes, thickness and text, then add your own shapes, holes and lettering around it. The preview on each card is the real engine output for the template's defaults.
2 templates in “decor”
Two-layer name sign (script)
220 × 120 mm rounded plaque with raised script lettering and two hanging holes.
Default 220 × 120 mm · plywood 3 mm
Engraved welcome plaque
300 × 150 mm single-layer plaque with engraved serif text and scalloped corners.
Default 300 × 150 mm · plywood 3 mm
Or start from a product family
Each family is a tested generator with explicit ranges. Open one with default sizes and customize from there.
Finger-joint box
AvailableA sturdy rectangular box with finger-jointed corners, optional removable cap lid and engraved text.
Not yet: Sliding and hinged lids are not available yet
Compartment organizer
AvailableAn open-top desk or drawer organizer with evenly spaced slot-in dividers and finger-jointed corners.
Not yet: Dividers run in one direction (across the width)
Layered name sign
AvailableA one- or two-layer plaque with your name as raised, engraved or stencil-cut letters and optional hanging holes.
Not yet: Stencil mode refuses letters with enclosed counters instead of producing loose islands
Coaster set
AvailableA set of identical coasters — round, rounded-square or hexagonal — with optional engraved text or border, and an optional holder rack.
Not yet: The holder needs a rigid material (plywood, MDF, acrylic) and laser cutting
Try it with your own measurements
No account needed. Open a real parametric design, change the dimensions and watch every joint follow — then pay only if you want the files.